模铸法制备P20钢锭模拟与微观组织研究

Simulation and Microstructure Study of P20 Steel Ingot Prepared by Die Casting Method

铁型覆砂铸造工艺生产高强度耐低温冲击球墨铸铁风电主轴铸件

Sand-coated Iron Mold Casting of Wind Turbine Main Shaft Made of High Strength and Low Temperature Impact Resistance Ductile Iron

双电极电渣溢流成形溢流区的凝固组织分析

Solidification Characteristics of the Overflow Zone in Duplex-Electrode ESOF

灰铸铁铁水炉前浇包内补碳工艺研究

Research on Carbon Replenishment in Ladle at the Furnace Tapping Point for Gray Iron

灰铸铁联体缸盖铸造缺陷控制研究

Research on the Control of Casting Defects of Gray Iron Integrated Cylinder Head

蠕铁气缸体量产中的蠕化衰退成因研究

Study on the Cause of Vermicularizing Fading in Mass Production of Vermicular Graphite Cast Iron Cylinder Block

铌强化灰铁缸盖生产实践

The Production Practice of Nb Enhanced GCI Cylinder Head

微合金元素在铸钢/铸铁工业产品中的研究进展

Progress of Microalloying Elements in Cast Steel and Cast Iron Industrial Products

S30432连铸二冷过程多因素工艺参数优化

Multi-factor process parameter optimization of S30432 continuous casting secondary cooling process

控制冷轧前的晶粒尺寸改善超薄高硅无取向硅钢的磁性能和力学性能

Controlling the Grain Size Before Cold Rolling to Improve the Magnetic and Mechanical Properties of Ultra-thin High Silicon Non-oriented Silicon Steel

智能铸造革新：大语言模型在铸造行业中的应用与挑战

Revolutionizing Foundry Intelligence: Applications and Challenges of Large Language Models in Casting Industry

脱模工步重型机床横梁铸件残余应力数值模拟与实验验证

Numerical Simulation and Experimental Validation of Residual Stress in Heavy Machine Tool Crossbeam Casting During Demolding

Fabrication of Ductile Iron with High Manganese

临界回火处理对铸态多相不锈钢的微观组织、力学性能及腐蚀行为的影响

Effect of Critical Tempering on Microstructure Evolution, Mechanical Performance, and Corrosion Behavior of a Cast Multiphase Stainless Steel

一种含Re镍基单晶高温合金中TCP相的形核与析出序列研究

Nucleation and Transition Sequences of TCP Phases During Heat-exposure in a Re-containing Ni-based Single Crystal Superalloy

小角晶界对第四代单晶高温合金组织及力学性能的影响

Effect of Low Angle Grain Boundary on the Microstructure and Mechanical Properties in a Fourth Generation Single Crystal Superalloy

Influence of Rare Earth Metals on the Phase Prepitation and Modification of Non-metallic Inclusion in Low Alloy Steel

铸造涂料研究进展与发展趋势

Research Progress and Development Trends in Foundry Coatings

高温合金薄壁件精密铸造技术研究进展

Research Progress on Gravity and Counter-gravity Casting of Thin-walled Superalloys

同步辐射X射线成像研究添加Mn的Al-3Fe合金初生富铁相生长行为

Synchrotron X-ray Image Study of the Primary Fe-rich Phases Growth in Al-3Fe Alloys with Mn Addition

烧结压力、粉末形态和增强相对粉末冶金TC4钛合金组织和力学性能的影响

Effects of Sntering Pressure, Powder Morphology and Reinforcement on Microstructure and Mechanical Properties of Powder Metallurgy TC4 Titanium Alloy

Megacasting and Sustainability – Driving New Advantages for the Automotive Industry

基于分子动力学模拟研究温度对TiN在纯钛中的扩散行为的影响

A Study on the Effect of Temperature on the Diffusion Behavior of TiN in Pure Titanium Using Molecular Dynamics Simulation

热处理对真空压铸Al80Si8Mg4Cu4Zn4合金组织特征及力学性能的影响

Effects of Heat Treatment on the Microstructure Characteristics and Mechanical Performance of Vacuum-assisted Die-casting Al80Si8Mg4Cu4Zn4 Alloy

溶质(Zn, Mg, Cu)含量对Al-Zn-Mg-Cu合金组织和性能的影响

The Effect of Solute Element (Zn, Mg, Cu) Contents On The Al-Zn-Mg-Cu Alloys: Microstructural And Mechanical Properties

SiC/Al复合材料界面微区变形机理研究

Investigation of Interfacial Micro-Zone Deformation Mechanisms in SiC/Al Composites

Production of Aluminum Castings in Green Sand

通过循环深冷处理策略实现AlCoCrFeNi_2.1共晶高熵合金的位错-析出相协同强化

Realizing the Dislocation-precipitate Synergistic Strengthening of AlCoCrFeNi_2.1 Eutectic High-entropy Alloy Through Cyclic Deep Cryogenic Treatment Strategy

通过热处理调节BCC和Sigma相的含量实现对Al_xCoCr_0.6NiV_0.6高熵合金性能的精确控制

Regulate the Content of BCC and Sigma Phases to Achieve Precise Control of the Performance of Al_xCoCr_0.6NiV_0.6 High Entropy Alloy Through Heat Treatment

调控针状析出相提升非等原子比FeNiCoCuTi高熵合金的强塑性协同性能

Tuning Needle-like Precipitation for Enhanced Strength-ductility Synergy in a Non-equiatomic FeNiCoCuTi High-entropy Alloy

Mn元素及超声处理对Al-4Ni-0.6Fe合金组织与性能的影响

Effects of Mn Element and Ultrasonic Vibration on Microstructure and Properties of Al-4Ni-0.6Fe Alloy

The European Lightmetal Sector - Current Status & Activities

基于JSCAST的油箱熔模铸造模拟及工艺优化

Simulation and Process Optimization of Oil Tank Investment Casting Based on JSCAST

挤压铸造ZM5镁合金隔板件偏析形成机理研究

Study on the Formation Mechanism of Segregation in Squeeze Casting ZM5 Magnesium Alloy Baffle

半固态注射成型镁基材料组织性能研究

Microstructure and Properties of Smi-solid Injection Molded Magnesium-based Materials

强制对流和压力作用下 Al-Si 合金枝晶生长的相场模拟

Phase-field Simulation of Dendrite Growth in Al-Si Alloys Under the Action of Forced Convection and Pressure

过渡金属掺杂FeNiCuCo HEAs的机械-热协同作用：第一性原理研究

Mechanical-Thermal Synergy in Transition Metal-Doped FeNiCuCo HEAs: A First-Principles Study

Phase-Field Lattice Boltzmann Study of Convection Effects on Dendritic Growth in Thin-Walled Al–0.576 wt% Cu Alloy

蜡模装配焊接过程数值模拟研究

Numerical Simulation of Wax Mold Assembly Welding Process

Mg-Y-Ni合金中LPSO相对弹性模量和铸造性能的影响

Influence of LPSO Phase on Elastic Modulus and Casting Performance in Mg-Y-Ni Alloys

提高 Mg-2Zn-2Cu 合金热导率的双级沉淀策略

Two-Stage Precipitation Strategy for Enhancing Thermal Conductivity in Mg-2Zn-2Cu Alloy

Sm对铸造Mg-Nd-Zn-Zr合金微观组织的影响

The Effect of Sm on the Microstructure of Cast Mg-Nd-Zn-Zr Alloy

Review on Approaches to Evaluating the Quality of Molten Aluminum Alloys

The Effects of Casting Methods on the Microstructure and Properties of Mg-4Al-4Ce-1Y Alloy

超声-电磁复合物理场对M174耐热铝合金熔体脱气行为及其作用机制的研究

Study on the Degassing Behavior and Mechanism of M174 Heat-Resistant Aluminum Alloy Melt by Ultrasonic-Electromagnetic Composite Physical Field

Numerical Analysis Verification of Quality Improvement Effect of Small Volume Solid Phase Die Casting Method by Controlling Molten Metal Temperature

稀土元素对Al-Si-Cu-Ni-Mg系铸造耐热铝合金熔体除气行为及其净化机制的研究

Research on the Degassing Behavior and Purification Mechanism of Rare Earth Elements on the Melt of Al-Si Series Cast Heat-resistant Aluminum Alloys

超高强塑性的多级异构铸态高熵合金

Hierarchical Hetero-structured As-cast High-entropy Alloys with Ultrahigh Strength and Ductility

碳对高温合金K4169铸造性能影响及机理研究

Effect of Carbon on the Casting Properties and Mechanism of Superalloy K4169

超声辅助过滤技术对M174耐热铝合金脱气效果的影响

Study on the Degassing Behavior and Mechanism of M174 Heat-Resistant Aluminum Alloy Melt by Ultrasonic-Electromagnetic Composite Physical Field

合金基体对铝泡沫机械性能和变形机制的影响

Effect of Alloy Matrix on the Mechanical Properties and Deformation Mechanisms of Aluminum Foams

Nb-Si基轻质超高温合金成分设计与成形工艺研究现状

Research Status on Composition Design and Forming Process of Nb-Si Based Lightweight Ultra-High Temperature Alloys

原位Ti?AlC析出对Ti45Al8Nb-0.6C合金蠕变行为的调控

Tailoring Creep Behavior Via In-Situ Ti?AlC Precipitation in Ti45Al8Nb-0.6C Alloy

近β合金Ti-4Al-6Cr-5Mo-5Nb-xTa的组织与力学性能演变

Microstructure and mechanical properties evolution of near-β alloy Ti-4Al-6Cr-5Mo-5Nb-xTa

TiB₂对高压铸造制备的AlSi10MnMg合金显微组织，力学性能及流动性的影响

The Effects of TiB₂ on Microstructure, Mechanical Properties, and Fluidity of AlSi10MnMg Alloy Fabricated by High Pressure Die Casting

Evaluation of Al-12%Si Alloy with 30 wt% Scrap for Al Piston Alloys

Sc对Al-Cu晶间液膜应力应变和热裂敏感性的影响

Effect of Sc on Stress-strain and Hot Tearing Susceptibility of Al-Cu Intercrystalline Liquid Film

高压压铸AE81镁合金车用构件微观组织与性能研究

Investigation of the Microstructure and Mechanical Properties of High Pressure Die Casting AE81 Magnesium Alloy Automotive Components

镁合金一体化压铸技术的最新进展

Recent Advances in Integrated Die-Casting of Magnesium Alloys

铝合金一体化压铸技术研究进展

Progress in Integrated Die-Casting Technology for Aluminum Alloys

Nb、Ti引入顺序对TiB₂表面的Nb偏聚和Al-4Ti-1Nb-1B细化性能的影响

The Effect of Nb, Ti Introduction Sequence on the Adsorption of Nb on TiB₂ Surface and Grain Refinement Performance of Al-4Ti-1Nb-1B

一体成型泡沫铝夹芯双管的抗落锤冲击性能

Drop-Weight Impact Resistances of Integrated Forming Aluminum Foam Sandwich Double Tubes

Characteristics of Cast Aluminum Alloys for Structural Components

中国压铸行业现状及发展趋势

Current Status and Development Trends of China Die Casting Industry

无机温芯盒粘结剂在铝合金铸件生产中的问题和解决方案

Issues and Solutions in the Application of Warm-box Inorganic Binder on Production of Aluminum Casting

高效制芯用CO₂树脂成套工艺材料研究与应用

Research and Application of Complete Process Materials for High-Efficiency CO₂ Resin Core-Making

一种新的纤维表面处理方法在精铸纤维复合型壳中的应用

Application of a Novel Fiber Surface Treatment Method in Fiber-reinforced Shells for Investment Casting

无机黏结剂工艺的研究及在铸钢件上的应用

Research on Inorganic Adhesive Technology and Its Application in Steel Castings

烧结温度对锆酸钙型壳与TA15钛合金界面反应研究

A Study on the Effect of Sintering Temperature on the Interfacial Reaction Between Calcium Zirconate Shells and TA15 Titanium Alloy

湿型砂鲕化层沉积动力学研究

Formation and Kinetics of Oolitic Deposits on Green Sand

自硬树脂砂高温力学性能的研究

Research on High-Temperature Mechanical Properties of No-bake Resin-bonded Sand

粘结剂喷射复合粉末固化无机粘结剂制备Al₂O₃基陶瓷型芯及其表征

Preparation And Characterization Of Al₂O₃-based Ceramic Cores By Binder Jetting Composite Powder Curing Inorganic Binder

退火温度对纳米Y₂O₃改性的选择性激光熔化TA15合金组织和力学性能的影响

Effect of Annealing Temperature on Microstructure and Mechanical Properties of Nano-Y₂O₃ Mediated Selective Laser Melting TA15 Alloy

电子束增材制造H13钢：参数优化、显微组织和力学性能

Electron Beam Melting of H13 Tool Steel: Parameter Optimization, Microstructure and Mechanical Properties

NaCl-Na₂CO₃无机盐配比对水溶性复合盐芯性能的影响

Effect of NaCl-Na₂CO₃ Inorganic Salt Ratio on the Performance of Water-Soluble Composite Salt Cores

热处理对激光选区熔化制备GH4738的组织和摩擦学性能的影响

The Influence of Heat Treatment on the Microstructure and Tribological Properties of GH4738 Fabricated by Selective Laser Melting

激光选区熔化CoCrFeNiMn高熵合金拉伸断裂的晶体塑性有限元模拟

Finite Element Simulation of Crystal Plasticity in the Tensile Fracture Behavior of Selective Laser Melting CoCrFeNiMn High Entropy Alloy

烧结保温时间对微挤出3D打印水溶性氧化钙陶瓷型芯性能的影响

Effect of Holding Time on Performance of Extrusion-Based 3D Printed Calcia Ceramic Core

热物性匹配与数值模拟驱动的H13钢耐磨堆焊层设计与优化

Thermophysical Property Matching and Numerical Simulation-Driven Design and Optimization of Hardfacing Layers on H13 Steel

增材制造结合精密铸造制备高熔点金属点阵结构

High-Melting Metallic Lattice Structures Fabricated by Additive Manufacturing Assisted Investment Casting

激光功率对SLM成形Ti-6Al-4V合金组织性能的影响

Effects of Laser Power on Microstructure and Properties of SLMed Ti-6Al-4V Alloy

IN625镍基合金电子束熔覆NiCrBSi涂层的微观组织和摩擦性能研究

Study on the Microstructure and Tribological Properties of IN625 Nickel-Based Alloy Electron Beam Cladding NiCrBSi Coating

基于高碳奥氏体稳定化的激光定向能量沉积H13钢力学性能优化

Optimization of Tensile Properties of H13 Steel Deposited by Laser Directional Energy Based on High Carbon Austenite Stabilization

氢化脱氢法制备粉末技术现状

Current Status of Powder Preparation by Hydride-Dehydride Process

激光功率对TiC增强316L不锈钢的温度场熔池的数值模拟研究

Numerical Simulation of Laser Power on Temperature Field Molten Pool of TiC-Enhanced 316L Stainless Steel

基于激光定向能量沉积Al-10Ce合金中Al??Ce?相的显微组织演变及其高温强化增韧机制

Microstructure Evolution of Al??Ce? Phase in Al-10Ce Alloy Based on Iaser Directed Energy Deposition and Its High Temperature Strengthening and Toughening Mechanism

SLM成形GH4169合金孔隙特征及致密度优化

Pore Characterization and Density Optimization in GH4169 Alloy Fabricated by Selective Laser Melting

一个统一的致密度方程：探索激光粉末床熔融夹带孔隙的物理机制

A Universal Relative Density Equation: Exploring the Physical Mechanism of Laser Powder Bed Fusion Entrained Porosity

电弧定向能沉积镁合金细晶组织控制及强韧化机理研究

Control of Fine Grain Structures and Strengthening-Toughening Mechanisms in Magnesium Alloys Fabricated by Wire-Arc Directed Energy Deposition

金属激光增材制造表面凹陷的原位监测与层间传递机制

In Situ Monitoring of Surface Depressions in Metal Laser Additive Manufacturing and Its Interlayer Transfer Mechanism

基于增材制造与铸造工艺融合的材料成形技术研究进展

Research Processes on Material Forming Technology Based on the Integration of Additive Manufacturing and Casting Processes

中小型铸造企业数字化转型路径探讨

Digetal Transformation Dilemmas and Paths for Small and Medium-Sized Foundries

Process Modeling for Return Sand Cooling System of Green Molding Sand Using Machine Learning

Intelligent and Sustainable Braking Systems: A Catalyst Automotive Safety and Manufacturing

Applying IIoT and AI in Foundries for Process Monitoring and Scrap

基于机器学习的铸造钛合金抗拉强度预测和成分优化

Machine Learning-Based Prediction and Composition of Tensile Strength in Cast Titanium Alloys

Pouring Flow Pattern Visualization Using Digital Twin Technology in Evaluation System of Manual Pouring Work

Heavy Object Handling by Human-Robot Collaboration System with Considering Operability and Positioning

铸件X射线探伤图像质量评估与自适应增强

Quality Assessment and Adaptive Enhancement of X-ray Radiographic Images for Castings

基于深度学习的铸件表面缺陷检测：系统综述与未来展望

Deep Learning-Based Detection of Casting Surface Defects: A Systematic Review and Future Perspectives

基于改进深度强化学习的分布式车间调度研究

Research on Distributed Workshop Scheduling Based on Improved Deep Reinforcement Learning

Research on Cooling Channel Design of Aluminum Alloy Die-Casting Mould Based on Simulation and Topology Optimization

Numerical Validation of Casting Flow Analysis Using the Cut Cell Method: A Grid Dependency Study

Numerical Simulation of Extrusion Casting Based on SPH Method

Analysis of the Application of Artificial in the Foundry Industry

喂丝工艺在厚大压铸机模板铸件生产中的实践应用

Practical Application of Wire Feeding Technology in the Production of Thick and Large Die-Casting Machine Mold Castings

树脂-粘土混合型铸造废砂微湿法再生关键技术和装备研发及全量利用

Research and Development of Key Technologies and Equipment for Micro-Wet Regeneration of Mixture of Resin Waste Sand and Green Waste Sand

2195铝合金铸锭半连铸过程残余热应力演化及脆性断裂机制的数值模拟与实验研究
Numerical Simulation and Experimental Investigation into the Brittle Fracture Mechanism of 2195 Aluminum Alloy Ingot during Semi-Continuous Casting

先进检测技术在空心涡轮叶片残余陶瓷型芯检测中的应用

Applications of Advanced Technologies in the Residual Ceramic Cores Detection for Hollow Turbine Blades

亚洲绿色铸造共同体理念下的以标准体系构建先进集群式铸造产业园联盟的探讨
Discussion on Building an Advanced Cluster Casting Industry Park Alliance with a Standard System under the Concept of Asian Green Casting

基于MAGMASOFT?模拟分析下的高压副车架开发方案对比

Comparison of High-Pressure Subframe Development Schemes Based on MAGMASOFT? Simulation Analysis

组建中国铸企标准化大生产能力驱动链以打造高质量民族铸件标准进阶序列的探索

Exploration of Establishing a Standardized Large Production Capability Driving Chain for Chinese Foundry Enterprises to Create an Advanced Sequence of High Quality National Casting Standards

基于实例分割算法的铸造裂纹缺陷的分割与量化

Casting Defect Segmentation and Quantification Based on Instance Segmentation Algorithm

Quantitative Analysis of Solidification Interface in Al-Cu Alloy using Time-Resolved X-ray Tomography

多角度虚拟探伤成像驱动的轻合金铸件内部缺陷三维定位方法

Multi-Angle Virtual Imaging-Driven 3D Positioning Method for Internal Defects in Light Alloy Castings

基于改进SMOTE算法的砂型复杂铸件缺陷预测研究

Research on Defect Prediction for Complex Sand Castings Based on an Improved SMOTE Algorithm

铝合金一体化压铸工艺研究进展

Research Progress on Giga-cast Technology of Aluminum Alloys

基于RSM的熔模铸造工艺参数优化实现涡轮叶片尺寸数字化控制

Dimensional Control of Turbine Blades Via RSM-Based Process Parameter Optimization in Investment Casting